Miscellaneous
Showing 1–24 of 26 resultsSorted by popularity
-
All Products, Force/Flex/Load, IR Proximity/Motion, Miscellaneous
Raindrops Detection Sensor Module No.1 Quality
All Products, Force/Flex/Load, IR Proximity/Motion, MiscellaneousRaindrops Detection Sensor Module No.1 Quality
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
SKU: IK-183 -
All Products, Distance/Proximity, Force/Flex/Load, IR Proximity/Motion, Miscellaneous, Sensors
Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino
All Products, Distance/Proximity, Force/Flex/Load, IR Proximity/Motion, Miscellaneous, SensorsTilt Sensor Vibration Alarm Vibration Switch Module for Arduino
-
Operating voltage: 3.3 to 5VDC
-
Ball Rolling type of tilt sensor.
- This small module is easy to use.
- AÂ fixed bolt hole for easy installation
- Wide voltage LM393 comparator
SKU: IK-188 -
-
All Products, Accessories, Accessories, Arduino, Development Boards, Miscellaneous, Sensors
ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Standard Quality
All Products, Accessories, Accessories, Arduino, Development Boards, Miscellaneous, SensorsADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Standard Quality
- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: IK-172 -
-
All Products, IR Proximity/Motion, Miscellaneous
TSOP1738 IR Receiver – Infrared Receiver at Best Price
All Products, IR Proximity/Motion, MiscellaneousTSOP1738 IR Receiver – Infrared Receiver at Best Price
- Very low supply current
- Photo-detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against EMI
- Supply voltage: 2.5 V to 5.5 V
- Improved immunity against ambient light
SKU: IK-264 -
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, Temperature
TEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, TemperatureTEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage Umax (V) : 15.4V
- Maximum Current Imax (A) : 6A
- Maximum Power: 92 W
- Maximum Temperature: 138°C
- Power Cord: 200mm
SKU: IK-123 -
All Products, Distance/Proximity, Miscellaneous, Potentiometer
M274 Rotary Encoder 360 Degree Brick Sensor Module Good Quality
All Products, Distance/Proximity, Miscellaneous, PotentiometerM274 Rotary Encoder 360 Degree Brick Sensor Module Good Quality
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm.
SKU: IK-175 -
All Products, Microphones, Miscellaneous, Speaker
LM393 Sound Detection Sensor Module
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: n/a -
-
All Products, Force/Flex/Load, Miscellaneous, Pressure/Touch
Heart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
All Products, Force/Flex/Load, Miscellaneous, Pressure/TouchHeart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: IK-195 -
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, Temperature
Flame Sensor infrared Receiver Ignition source detection module No.1 Quality
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, TemperatureFlame Sensor infrared Receiver Ignition source detection module No.1 Quality
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: IK-186 -
-
All Products, Accessories, Miscellaneous, SD Cards
Micro SD Card Reader Module
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
SKU: IK-148 -
-
All Products, Miscellaneous, Sensors
PS2 Joystick Module Breakout Sensor Standard Quality
- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: IK-173 -
All Products, IR Proximity/Motion, Miscellaneous
IIC/I2C Serial Interface Adapter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
SKU: IK-120 -
All Products, Accessories, AI Thinker WiFi Module, Miscellaneous
CP2102(6-pin) USB 2.0 to TTL UART serial converter
All Products, Accessories, AI Thinker WiFi Module, MiscellaneousCP2102(6-pin) USB 2.0 to TTL UART serial converter
- Brand new and high quality
- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
SKU: n/a -
Accessories, AI Thinker WiFi Module, All Products, Miscellaneous
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
Accessories, AI Thinker WiFi Module, All Products, MiscellaneousCH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
SKU: n/a -
All Products, Clock & Timer ICs, Miscellaneous, Power Supply, Relays, Switches & Keypads
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle at Best Price
All Products, Clock & Timer ICs, Miscellaneous, Power Supply, Relays, Switches & Keypads6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle at Best Price
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
SKU: IK-253
