TTP224 4-way Capacitive Touch Switch Module Standard Quality Subtotal: ₹99.00
Pressure/Touch
Showing all 9 resultsSorted by popularity
-
All Products, Pressure/Touch, Sensors
BMP180 Digital Barometric Sensor Module compatible with Arduino
All Products, Pressure/Touch, SensorsBMP180 Digital Barometric Sensor Module compatible with Arduino
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
SKU: IK-191 -
All Products, Accessories, Keyboard & Mouse, Pressure/Touch, Switches & Keypads
4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
All Products, Accessories, Keyboard & Mouse, Pressure/Touch, Switches & Keypads4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: IK-138 -
All Products, Pressure/Touch
TTP223 Capacitive Touch Sensor Module (2Pcs)
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
SKU: IK-161 -
All Products, Magnetic/Vibration, Pressure/Touch
Piezoelectric Sensor/Transducer/Buzzer – 35mm Diameter Standard Quality
All Products, Magnetic/Vibration, Pressure/TouchPiezoelectric Sensor/Transducer/Buzzer – 35mm Diameter Standard Quality
- Color: Golden
- Size: Approx. 35 x 35 x 0.5mm
- Material: Copper and ceramic
- Resonant impedance: max. 300 Ω
- Static capacitance: 50000pF±30 percent
- Resonant frequency: 1.8±0.3kHz
SKU: IK-263 -
-
All Products, Force/Flex/Load, Miscellaneous, Pressure/Touch
Heart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
All Products, Force/Flex/Load, Miscellaneous, Pressure/TouchHeart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: IK-195 -
All Products, Pressure/Touch
Digital Sensor TTP223B Module Capacitive Touch Switch Standard Quality
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: IK-162 -
All Products, Pressure/Touch
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: IK-257 -
All Products, Pressure/Touch
TTP224 4-way Capacitive Touch Switch Module Standard Quality
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
SKU: IK-163
