Sensors
Showing 1–24 of 67 resultsSorted by popularity
-
All Products, Current/Voltage, Voltage Regulator
Voltage Detection Sensor Module 25V
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino
- Voltage input range: DC 0-25 V
- Voltage detection range: DC 0.02445 VÂ to 25 V
- Voltage analog resolution : 0.00489 V
SKU: IK-150 -
All Products, Light/Colour
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: IK-187 -
All Products, Force/Flex/Load, IR Proximity/Motion, Miscellaneous
Raindrops Detection Sensor Module No.1 Quality
All Products, Force/Flex/Load, IR Proximity/Motion, MiscellaneousRaindrops Detection Sensor Module No.1 Quality
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
SKU: IK-183 -
-
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, Temperature
Flame Sensor infrared Receiver Ignition source detection module No.1 Quality
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, TemperatureFlame Sensor infrared Receiver Ignition source detection module No.1 Quality
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: IK-186 -
All Products, Current/Voltage
5A range Current Sensor Module ACS712
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SKU: IK-189 -
All Products, AC-DC Converter, Battery, Current/Voltage, Power Supply, Sensors, Voltage Regulator
DC 100V 100A Voltmeter Ammeter 0.28″ 5 Wires Red Led Digital Dual Without Shunt at Best Price
All Products, AC-DC Converter, Battery, Current/Voltage, Power Supply, Sensors, Voltage RegulatorDC 100V 100A Voltmeter Ammeter 0.28″ 5 Wires Red Led Digital Dual Without Shunt at Best Price
- Operating Voltage: 5V DC
- Current Consumption:Â <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
SKU: IK-204 -
All Products, Pressure/Touch, Sensors
BMP180 Digital Barometric Sensor Module compatible with Arduino
All Products, Pressure/Touch, SensorsBMP180 Digital Barometric Sensor Module compatible with Arduino
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
SKU: IK-191 -
All Products, Distance/Proximity, Force/Flex/Load, IR Proximity/Motion, Miscellaneous, Sensors
Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino
All Products, Distance/Proximity, Force/Flex/Load, IR Proximity/Motion, Miscellaneous, SensorsTilt Sensor Vibration Alarm Vibration Switch Module for Arduino
-
Operating voltage: 3.3 to 5VDC
-
Ball Rolling type of tilt sensor.
- This small module is easy to use.
- AÂ fixed bolt hole for easy installation
- Wide voltage LM393 comparator
SKU: IK-188 -
-
All Products, Sensors, Temperature
DS18B20 Water Proof Temperature Probe – Black (1m)
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: IK-179 -
All Products, Accessories, Accessories, Arduino, Development Boards, Miscellaneous, Sensors
ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Standard Quality
All Products, Accessories, Accessories, Arduino, Development Boards, Miscellaneous, SensorsADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Standard Quality
- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: IK-172 -
-
All Products, IR Proximity/Motion, Magnetic/Vibration, Sensors
Best Vibration sensor module alarm Motion sensor module vibration switch SW-420
All Products, IR Proximity/Motion, Magnetic/Vibration, SensorsBest Vibration sensor module alarm Motion sensor module vibration switch SW-420
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: IK-165 -
All Products, Audio Components, Sensors, Speaker
MP3-TF-16P MP3 SD Card Module with Serial Port
- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
SKU: IK-158 -
-
All Products, Accessories, Keyboard & Mouse, Pressure/Touch, Switches & Keypads
4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
All Products, Accessories, Keyboard & Mouse, Pressure/Touch, Switches & Keypads4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: IK-138 -
All Products, Pressure/Touch
TTP223 Capacitive Touch Sensor Module (2Pcs)
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
SKU: IK-161 -
All Products, IR Proximity/Motion, Miscellaneous
TSOP1738 IR Receiver – Infrared Receiver at Best Price
All Products, IR Proximity/Motion, MiscellaneousTSOP1738 IR Receiver – Infrared Receiver at Best Price
- Very low supply current
- Photo-detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against EMI
- Supply voltage: 2.5 V to 5.5 V
- Improved immunity against ambient light
SKU: IK-264 -
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, Temperature
TEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, TemperatureTEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage Umax (V) : 15.4V
- Maximum Current Imax (A) : 6A
- Maximum Power: 92 W
- Maximum Temperature: 138°C
- Power Cord: 200mm
SKU: IK-123 -
All Products, Light/Colour
Buy TCS3200 Colour Sensor Recognition
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: IK-193
