Shop
Showing 49–72 of 248 resultsSorted by popularity
-
All Products, Custom Kits, DIY Kits, Robot Kits
Smart Car Chassis 2 BO motor Transparent Robot Standard Quality
All Products, Custom Kits, DIY Kits, Robot KitsSmart Car Chassis 2 BO motor Transparent Robot Standard Quality
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
SKU: IK-232 -
All Products, Battery Charger, BMS(Battery Management System), Power Supply, Voltage Regulator
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection Standard Quality
All Products, Battery Charger, BMS(Battery Management System), Power Supply, Voltage RegulatorTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection Standard Quality
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: IK-152 -
All Products, Cables & Connector, Jumper Wires
Dupont Cable Line Female to Female 40 Pin 30cm Good Quality
All Products, Cables & Connector, Jumper WiresDupont Cable Line Female to Female 40 Pin 30cm Good Quality
- 40P color DuPont line
- Length: 300mm
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: IK-134 -
All Products, ESP Boards, ESP32 Boards, IOT & Wireless
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
All Products, ESP Boards, ESP32 Boards, IOT & WirelessESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applicationsSKU: IK-104 -
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, Temperature
TEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
All Products, Heat Shrinks, Metal Heat Shrinks, Miscellaneous, TemperatureTEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module Good Quality
- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage Umax (V) : 15.4V
- Maximum Current Imax (A) : 6A
- Maximum Power: 92 W
- Maximum Temperature: 138°C
- Power Cord: 200mm
SKU: IK-123 -
All Products, Force/Flex/Load, IR Proximity/Motion, Miscellaneous
Raindrops Detection Sensor Module No.1 Quality
All Products, Force/Flex/Load, IR Proximity/Motion, MiscellaneousRaindrops Detection Sensor Module No.1 Quality
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
SKU: IK-183 -
-
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, Temperature
Flame Sensor infrared Receiver Ignition source detection module No.1 Quality
All Products, Distance/Proximity, IR Proximity/Motion, Miscellaneous, TemperatureFlame Sensor infrared Receiver Ignition source detection module No.1 Quality
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: IK-186 -
All Products, Current/Voltage
5A range Current Sensor Module ACS712
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SKU: IK-189 -
All Products, Amplifiers, Microphones
LM393 Sound Detection Sensor Module – Black
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: n/a -
All Products, Buck/Boast Converter, DC-DC Converter
LM2596S DC-DC Buck Converter Power Supply Standard Quality
All Products, Buck/Boast Converter, DC-DC ConverterLM2596S DC-DC Buck Converter Power Supply Standard Quality
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
SKU: IK-145 -
All Products, Accessories, Accessories, AI Thinker WiFi Module, ESP Boards
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino Standard Quality
All Products, Accessories, Accessories, AI Thinker WiFi Module, ESP BoardsUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino Standard Quality
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
SKU: IK-146 -
All Products, 12v Relay
12V 6 Channel with Light Coupling Relay Module
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: IK-251 -
All Products, GSM/GPS/GPRS
NEO-6M GPS Module with EPROM
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: IK-110 -
All Products
NODEMCU ESP8266 Wifi Development IOT Board
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: IK-103 -
All Products
Radiomaster Pocket Radio Controller –ELRS-Charcoal
- Item: Pocket Radio
- Operating frequency: 2.400GHz-2.480GHz
- Internal RF Options: ELRS 2.4GHz
- Supported protocols: Module dependent
- Operational voltage: 6.6-8.4v DC
- Operating system: EdgeTX
- Control channels: Maximum 16 (Receiver dependent)
- Display: 128*64 Monochrome LCD
- Charging: Built in USB-C QC3 Charging
- Upgradable Firmware: Via USB or the included SD card
- Gimbal: Hall-effect
SKU: RM-001 -
All Products, Adapter, Power Supply, SMPS
SMPS Power Adaptor – 12V/2A (Power supply) at Best Price
- Input Voltage: 100-240VAC, 50/60Hz
- Output: 12V 2A
- Output Adapter: 5.5mm x 2.5mm
- PWM design, make sure the stability and high efficiency of power supply.
- Anti-jamming, passed EMC test, wave less than 20MV.
- Efficiency above 80%, exotherm less than 25 degree
- Function: with overvoltage protection, short-circuit protection, overload protection
- Non-waterproof
SKU: IK-333 -
All Products, Glue Gun, Tools & Instrument
Hi-Tek Standard Temperature 40 Watt Hot Melt Glue Gun
- Voltage: 110-220V
- Power consumption: 40W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 40 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
SKU: IK-331
