All Products
Showing 1–24 of 246 resultsSorted by popularity
-
All Products, AI Thinker WiFi Module
ESP32 Camera Development Board WiFi+Bluetooth Module with OV2640 Camera Module Standard Quality
All Products, AI Thinker WiFi ModuleESP32 Camera Development Board WiFi+Bluetooth Module with OV2640 Camera Module Standard Quality
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
SKU: IK-223 -
All Products, Current/Voltage, Voltage Regulator
Voltage Detection Sensor Module 25V
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino
- Voltage input range: DC 0-25 V
- Voltage detection range: DC 0.02445 VÂ to 25 V
- Voltage analog resolution : 0.00489 V
SKU: IK-150 -
-
All Products, Arduino Boards
Arduino Uno R3 SMD Compatible Development Board(Without cable)
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: IK-112 -
All Products, Raspberry Pi, Raspberry Pi Boards
Raspberry Pi 4 Model B with 2 GB RAM Standard Quality
All Products, Raspberry Pi, Raspberry Pi BoardsRaspberry Pi 4 Model B with 2 GB RAM Standard Quality
- 2GB/4GB Varients
- Quad-Core 64-bit Broadcom 2711, Cortex A72Â Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C Port
SKU: IK-243 -
All Products, Battery, Battery Holder
Cell Box/Black Plastic Storage Box Case Holder For Battery 3 x 18650, Without Cover Standard Quality
All Products, Battery, Battery HolderCell Box/Black Plastic Storage Box Case Holder For Battery 3 x 18650, Without Cover Standard Quality
- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
SKU: IK-213 -
-
-
All Products, RF/NRF Module
3.3V Adapter Board for 24L01 Wireless Module
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
SKU: IK-141 -
All Products, RF/NRF Module
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: IK-140 -
All Products, Cables & Connector, Jumper Wires
Male to Male Jumper Wires 40 Pin 30cm Standard Quality
All Products, Cables & Connector, Jumper WiresMale to Male Jumper Wires 40 Pin 30cm Standard Quality
- 40P Color Jumper Wire
- Length: 400mm
- Weight: 56 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: IK-136 -
All Products, Accessories, Motors & Mechanicals, Power Supply
L298n Motor Driver 2A Based Module – Good Quality
All Products, Accessories, Motors & Mechanicals, Power SupplyL298n Motor Driver 2A Based Module – Good Quality
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: IK-132 -
All Products, Light/Colour
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: IK-187 -
All Products, 5V Relay
5V Dual Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: IK-130 -
12v Relay, All Products
4 Channel Relay Module (with light coupling) 5V
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: IK-131 -
All Products
100 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
SKU: IK-209
