-
×
170 pts Mini Breadboard SYB-170 Black
1 × ₹30.00
Subtotal: ₹30.00
Shop
Showing 169–192 of 246 resultsSorted by popularity
-
All Products, Force/Flex/Load, Miscellaneous, Pressure/Touch
Heart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
All Products, Force/Flex/Load, Miscellaneous, Pressure/TouchHeart Rate Sensor/Pulse Rate Sensor Module No.1 Quality
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: IK-195 -
-
All Products, IR Proximity/Motion
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
SKU: n/a -
All Products, Pressure/Touch
Digital Sensor TTP223B Module Capacitive Touch Switch Standard Quality
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: IK-162 -
All Products, Light/Colour
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
SKU: n/a -
All Products, Temperature
Digital DHT22 Temperature and Humidity Sensor Module AM2302 Standard Quality
All Products, TemperatureDigital DHT22 Temperature and Humidity Sensor Module AM2302 Standard Quality
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: IK-256 -
All Products, Temperature
DHT11 Temperature And Humidity Sensor Module Standard Quality
- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
SKU: IK-184 -
All Products, Pressure/Touch
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: IK-257 -
All Products, Accelerometer/Gyro
ADXL345 Tripple Axis Accelerometer Board Standard Quality
- Supply Voltage:Â 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
SKU: IK-194 -
-
All Products, IR Proximity/Motion, Temperature
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Arduino No.1 Quality
All Products, IR Proximity/Motion, TemperatureSoil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Arduino No.1 Quality
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
SKU: IK-182 -
All Products, Current/Voltage
30A range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
SKU: n/a -
All Products, Current/Voltage
20A Range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: n/a -
All Products, Buck/Boast Converter, DC-DC Converter
XL6009 DC-DC Step-Up Converter Ultra LM2577 Booster Circuit Board Standard Quality
All Products, Buck/Boast Converter, DC-DC ConverterXL6009 DC-DC Step-Up Converter Ultra LM2577 Booster Circuit Board Standard Quality
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
SKU: IK-143 -
All Products, Buck/Boast Converter, DC-DC Converter
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
All Products, Buck/Boast Converter, DC-DC ConverterXL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Over-temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: n/a -
All Products, Buck/Boast Converter, DC-DC Converter
XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module with Heatsink
All Products, Buck/Boast Converter, DC-DC ConverterXL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module with Heatsink
- Input voltage range: 4V-38V DC
- Output voltage range: 1.25V-36V DC adjustable.
- Output current: 0-5A.
- Output power: 75W.
- High efficiency up to 96%
- The built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
SKU: n/a -
All Products, Pressure/Touch
TTP224 4-way Capacitive Touch Switch Module Standard Quality
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
SKU: IK-163 -
All Products, Amplifiers
PAM8403 Mini 5V Digital Amplifier Board With Switch Potentiometer Standard Quality
All Products, AmplifiersPAM8403 Mini 5V Digital Amplifier Board With Switch Potentiometer Standard Quality
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
SKU: IK-255 -
All Products, Amplifiers, Microphones, Speaker
MT8870 DTMF Decoder Audio/Speech Telephone Module Standard Quality
All Products, Amplifiers, Microphones, SpeakerMT8870 DTMF Decoder Audio/Speech Telephone Module Standard Quality
The MT8870 module is a low power device DTMF decoder chip. It is a complete DTMF receiver integrating both the band-split filter and digital decoding functions. This module is suitable for modem interfaces, mobile radios and other DTMF related applications.
SKU: IK-254
