Shop
Showing 25–48 of 246 resultsSorted by popularity
-
All Products, Light/Colour
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: IK-187 -
All Products, 5V Relay
5V Dual Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: IK-130 -
12v Relay, All Products
4 Channel Relay Module (with light coupling) 5V
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: IK-131 -
All Products
100 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
SKU: IK-209 -
All Products
GPRS SIM800L GSM Module Core Board Quad-band TTL Serial Port with the antenna Standard Quality
All ProductsGPRS SIM800L GSM Module Core Board Quad-band TTL Serial Port with the antenna Standard Quality
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: IK-166 -
All Products, ESP8266 Boards
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: IK-102 -
All Products, Arduino Boards
Arduino Nano R3 Compatible Board with CH340 chip(Unsoldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: IK-115 -
-
All Products, Soldering & Accessories
FLUX soldering paste-15g
- Net Content: 10g
- Paste Color: White
- Does not create High Smoke
- Does not create Foul/Bad Smell
- No Residual Waste
- High-Quality Soldering Additives & Activators for effective soldering
- Useful for general purpose soldering, electrical wires, components, and cables etc
SKU: IK-329 -
All Products, Soldering & Accessories, Tools & Instrument
SIRON 25W Soldering Iron
- Brand: Siron
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
SKU: IK-327 -
All Products, Soldering & Accessories, Tools & Instrument
SIRON Soldering Iron 60W Standard Quality
- Operating Voltage: 150~230V
- Rated Power: 60W
- Bit type: Chisel 60W Rated
- Cable Length: 1.5Meter
- Safe for the use of dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
- Portable, Lightweight and easy to use.
SKU: IK-326 -
-
-
All Products, Custom Kits, DIY Kits, Robot Kits
Smart Car Chassis 2 BO motor Transparent Robot Standard Quality
All Products, Custom Kits, DIY Kits, Robot KitsSmart Car Chassis 2 BO motor Transparent Robot Standard Quality
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
SKU: IK-232 -